Teltonika RUT951 Industrial Cellular Router

• Mobile module

4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

• SIM switch

2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

• Status

Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

• SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

• USSD

Supports sending and reading Unstructured Supplementary Service Data messages

• Black/White list

Operator black/white list

• Multiple PDN

Possibility to use different PDNs for multiple network access and services

• Band management

Band lock, Used band status display

• APN

Auto APN

• Bridge

Direct connection (bridge) between mobile ISP and device on LAN

• Passthrough

Router assigns its mobile WAN IP address to another device on LAN

• Wireless mode

IEEE 802.11b/g/n, Access Point (AP), Station (STA)

• WiFi security

WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

• SSID/ESSID

SSID stealth mode and access control based on MAC address

• WiFi users

Up to 100 simultaneous connections

• Wireless Hotspot

Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

• WAN

1 x WAN port  10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

• LAN

3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

• Routing

Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

• Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

• VoIP passthrough support

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

• Connection monitoring

Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

• Firewall

Port forward, traffic rules, custom rules

• DHCP

Static and dynamic IP allocation, DHCP Relay, Relayd

• QoS / Smart Queue Management (SQM)

Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

• DDNS

Supported >25 service providers, others can be configured manually

• Network backup

WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

• Load balancing

Balance Internet traffic over multiple WAN connections

• Hotspot

Internal/external Radius server, captive portal, built in customizable landing page

• SSHFS

Possibility to mount remote file system via SSH protocol

• Authentication

Pre-shared key, digital certificates, X.509 certificates

• Firewall

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

• Attack prevention

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

• VLAN

Port and tag based VLAN separation

• Mobile quota control

Custom data limits for both SIM cards

• WEB filter

Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

• Access control

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

• OpenVPN

Multiple clients and a server can run simultaneously, 12 encryption methods

• OpenVPN Encryption

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

• IPsec

IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

• GRE

GRE tunnel

• PPTP, L2TP

Client/Server instances can run simultaneously, L2TPv3 support

• Stunnel

Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

• DMVPN

Method of building scalable IPsec VPNs

• SSTP

SSTP client instance support

• ZeroTier

ZeroTier VPN client support

• WireGuard

WireGuard VPN client and server support

• ID range

Respond to one ID in range [1;255] or any

• Allow Remote Access

Allow access through WAN

• Custom registers

MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

• Supported functions

01, 02, 03, 04, 05, 06, 15, 16

• Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

• Protocol

HTTP(S), MQTT, Azure MQTT

• MQTT Gateway

Allows sending commands and receiving data from MODBUS Master through MQTT broker

• Supported modes

TCP Master, DNP3 Outstation

• WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

• FOTA

Firmware update from server, automatic notification

• SSH

SSH (v1, v2)

• SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

• Call

Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off

• TR-069

OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

• MQTT

MQTT Broker, MQTT publisher

• SNMP

SNMP (v1, v2, v3), SNMP Trap

• JSON-RPC

Management API over HTTP/HTTPS

• MODBUS

MODBUS TCP status/control

• RMS

Teltonika Remote Management System (RMS)

• Cloud of Things

Allows monitoring of: Device data, Mobile data, Network info, Availability

• ThingWorx

Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

• Cumulocity

Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

• Azure IoT Hub

Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

• CPU

Mediatek MIPS 24Kc 580 MHz

• RAM

128 MB, DDR2

• FLASH storage

16 MB, SPI Flash

• WEB UI

Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

• FOTA

Update FW

• RMS

Update FW/configuration for multiple devices at once

• Keep settings

Update FW without losing current configuration

• Operating system

RutOS (OpenWrt based Linux OS)

• Supported languages

Busybox shell, Lua, C, C++

• Development tools

SDK package with build environment provided

• Input
   

1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

• Output
   

1 x Digital Output, Open collector output, max output 30 V, 300 mA

• Events

Email, RMS, SMS