Previous
Next

Teltonika RUTXR1 Enterprise rack-mountable SFP/LTE Router

SKU Teltonika RUTXR1 Category Teltonika 4G router
€355.00
Tax excluded

Delivery:

Last items in stock

Teltonika RUTXR1 is our first-ever rack-mounted LTE Cat6 router with redundant power supplies and WAN interfaces, which can be conveniently placed in a server cabinet. It is equipped with dual SIM, USB, and Wave-2 802.11ac Dual Band WIFI. But what makes this product stand out from the rest of Teltonika Networks products are the SFP WAN and dedicated console ports. The unique feature set of this product allows using it as a primary product in a small or home office with LTE backup capabilities, powerful WiFi, and no need for an additional SFP to Ethernet converter.

This feature-rich device is powered by RutOS and is a perfect choice, where a speedy and ultra-reliable connection is required (e.g. enterprise environment).

Related Products

Teltonika RUTXR1 Enterprise rack-mountable  SFP/LTE Router

MOBILE
Mobile module4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps
SIM switch2 SIM cards, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail
StatusSignal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto replay
USSDSupports sending and reading Unstructured Supplementary Service Data messages
Black/White listOperator black/white list
Multiple PDNPossibility to use different PDNs for multiple network access and services
Band managementBand lock, Used band status display
APNAuto APN
Bridge modeDirect connection (bridge) between mobile ISP and device on LAN
WIRELESS
Wireless mode802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi securityWPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSIDESSID stealth mode
WiFi usersup to 150 simultaneous connections
Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
WAN1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Fiber1 x SFP port (cannot work simultaneously with Ethernet WAN port)
LAN4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
CONSOLE
ConsoleRS-232 (RJ45) console port for router configuration and debuging
NETWORK
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake on LAN (WOL), DLNA
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoringPing Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forwards, traffic rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
Network backupVRRP, Mobile, Wired, Fiber and WiFi WAN options, each of which can be used as an automatic Failover
Load balancingBalance Internet traffic over multiple WAN connections
SSHFSPossibility to mount remote file system via SSH protocol
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANPort and tag based VLAN separation
Mobile quota controlCustom data limits for both SIM cards
WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3 support
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs
SSTPSSTP client instance support
ZerotierZerotier VPN client support
WireGuardWireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filteringRespond to one ID in range [1;255] or any
Allow remote accessAllow access through WAN
Custom registersModbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS RTU MASTER (RS232)
Supported baud ratesFrom 300 to 115200
Supported functions01, 02, 03, 04, 05 (only for alarms), 06 (only for alarms), 15 (only for alarms), 16 (only for alarms)
Number of data bitsFrom 5 to 8
Number of stop bits1 or 2
ParityNone, Even, Odd
FlowNone, RTS/CTS, Xon/Xoff
MQTT GATEWAY
GatewayAllows sending commands and receiving data from Modbus Master trough MQTT broker
DNP3
Supported modesTCP Master, DNP3 Outstation
DATA TO SERVER
ProtocolsHTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
CallReboot, Status, Mobile data on/off, Output on/off
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP Trap
JSON-RPCManagement API over HTTP/HTTPS
ModbusModbus TCP status/control
RMSTeltonika Remote Management Systems (RMS)
IoT PLATFORMS
Clouds of thingsAllows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorxAllows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
CumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT HubCan send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
CPUQuad-core ARM Cortex A7, 717 MHz
RAM256 MB, DDR3
FLASH storage256 MB, SPI Flash
FIRMWARE/CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided
SERIAL
RS232RJ45 connector, full RS232 (with RTS, CTS)
Serial functionsConsole (active by default), Modbus gateway, Modbus RTU master, Serial OverIP, Modem mode (Full or partial), Ntrip client
USB
Data rateUSB 2.0
ApplicationsSamba share, USB-to-serial
External devicesPossibility to connect external HDD, flash drive, additional modem, printer
Storage formatsFAT, FAT32, NTFS
POWER
Connector2 x 4 pin industrial DC power sockets for main and redundancy power sources
Input voltage range9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
Power consumptionidle: <3W, max: 18W
PHYSICAL INTERFACES
Ethernet5 x RJ45 ports, 10/100/1000 Mbps
Console1 x RJ45, RS232 communication
Fiber1 x SFP port
Status LEDs2 x WAN type, 2 x Mobile connection type, 3 x Mobile signal strength, 2 x active SIM, 10 x Ethernet status, 2 x Console status, 2 x Power
SIM2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
Power2 x 4 pin DC connector
Antennas2 x SMA for LTE, 2 x RP-SMA for WiFi
USB1 x USB A port for external devices
ResetReboot/User default reset/Factory reset button
Other1 x Grounding screw, 1 x lock
PHYSICAL SPECIFICATION
Casing materialFull steel housing
Dimensions (W x H x D)272 x 42.6 x 122.6 mm
Weight1050 g
Mounting optionsRack mounting, flat surface placement
OPERATING ENVIRONMENT
Operating temperature-40°C to +75°C
Operating humidity10 % to 90 % non-condensing
Category Teltonika 4G router Brand Teltonika Networks EAN13 4779027312613 In stock 1 Item
Teltonika RUTXR1 Enterprise rack-mountable SFP/LTE Router
Teltonika RUTXR1 Enterprise rack-mountable SFP/LTE Router
Rating:
5/5
5 Read user reviews: 1
Comments (1)
Grade
No customer reviews for the moment.